HST25--D5 10N--5000N High Speed Testing System

1 Important function:

1) Test and research with metallic, nonmetallic, aluminum alloy, compounding material, component, assembly unit, structural component for high speed, high speed compression property.

2) High speed tensile--tensile test, high speed tensile--compression test, high speed rapid compression test, high speed tensile impact test, high speed cycling test.

3) High speed tensile and impact test with thin sheet, plate, string, foil, flat, wire, stick, proximate matter, tube, square, round, rectangle and round ring shaped, cast iron, nonmetallic cast iron alloy, tubular, proportional sample, non-proportional simple, longitudinal and horizontal peeling strip of thickness of entire wall, rectangle cross section sample, round cross section sample.

4) High speed tensile and impact test with thin metal, wire, thin wire, fiber, elastomer, foam material.

5) High speed tensile and impact test with electronic component, textile, food, medicine, cosmetics, rubber, plastic, film, chemical material.

2 Important specification

1) High speed tensile and compression loading capacity: 10N/ 20N/ 30N/ 50N/ 100N/ 200N/ 1000N/ 2000N/ 3000N/ 5000N.

2) High speed tensile and compression test speed: 0.1mm/min--25m/min, 1000in/min set freely in the range.

3) High speed and compression test start and stop time: ≤2.0s

4) Precision high speed tensile and compression speed: ≤±0.5%

5) Resolution of position of high speed tensile and compression test:0.033μm

6) Loading precision of high speed tensile and compression test: ±0.5% of indicating value(range: 0.2%--100%F.S).

7) Gathering frequency of high speed tensile and compression test: 1000Hz(seting dividing point between 10Hz -- 1000Hz)

8) High speed tensile and impact test software.

9) Optional standard computer cabinet

10) Optional rotating type of operation system

11) Touch screen system