High Speed Testing Machine

1 Introduction

1) mechanical property testing and researching by tensile, compression, bending, torsion, shearing test for metal, nonmetal, composite material by room temperature.

2) sheet, board, belt, foil, flat bar, wire, bar, proximate matter, pipe, shape of square, rectangle and ring, cast iron, non-titanium alloy, tube section specimen, proportion specimen(proportion factor k=11.3 or 5.65), non-proportion specimen, total wall thickness longitudinal and crosswise split specimen, rectangle cross-section sample, round cross-section sample.

3) test with variety of metal sheet, wire, thin thread, fiber, elastomer, foam.

4) textile, food, medicine, cosmetic, rubber, plastic, thin film, biological material.

5) tensile, peeling and welding test with electronic element.

6) test for peeling, bending and fastener property with printing circuit board.

7) tensile test with wood, paper and film product.

8) stress relaxation test and adhesive bonding test.

2 Specification

1) loading capacity of high speed tensile and compression test: 100N, 200N, 500N, 1000N, 2000N, 5kN, 10kN, 20kN, 30kN, 50kN, 100kN.

2) Speed:

0.0001～6000mm/min

0.0001～6000mm/min (240in/min)(100mm/s)

0.0001～5000mm/min (200in/min)

0.0001～4000mm/min (160in/min)

0.0001～3000mm/min (120in/min)

0.0001～2000mm/min (80in/min)

0.0001～1500mm/min (60in/min)

0.0001～1000mm/min (40in/min)

3) start time of test: 0 --6000mm/min/1.0s

4) Stop time of test: 6000mm/min --0 /1.0s

5) Precision of high speed: ±0.2%

6) Control precision of position: ±0.2%

7) Precision of loading: ±0.5% of indicating value(0.2% --100% of full scale)

8) Gathering rate:1000Hz(set between 10Hz -- 1000Hz)

9) Optional standard cabinet, rotate computer control system and touch screen system.