Low and Slow Speed Testing Machine

Introduction

1) mechanical property testing and researching by tensile, compression, bending, torsion, shearing test for metal, nonmetal, composite material by room temperature.

2) sheet, board, belt, foil, flat bar, wire, bar, proximate matter, pipe, shape of square, rectangle and ring, cast iron, non-titanium alloy, tube section specimen, proportion specimen(proportion factor k=11.3 or 5.65), non-proportion specimen, total wall thickness longitudinal and crosswise splinted specimen, rectangle cross-section sample, round cross-section sample.

3) test with variety of metal sheet, wire, thin thread, fiber, elastomer, foam.

4) textile, food, medicine, cosmetic, rubber, plastic, thin film, biological material.

5) tensile, peeling and welding test with electronic element.

6) test for peeling, bending and fastener property with printing circuit board.

7) tensile test with wood, paper and film product.

8) stress relaxation test and adhesive bonding test.

2 Specification

1) Range of speed: 10^-7--2mm/min

2) Precision of speed: ±0.2%

3) Resolution of position: 0.033μm

4) Control precision of position: ±0.2%

5) Precision of loading: ±0.5% of indicating value(0.2 -- 100% of full scale)

6) Gathering rate: 500Hz, 1000Hz

7) Loading capacity: 1kN, 2kN, 5kN, 10kN, 20kN, 50kN, 100kN.