|
Computer Control Electronic Tensile Testing Machine
1 Important function:
1) tensile, compression, bending, torsion, shearing testing and researching with variety of metal, nonmetal material and composite material under room temperature.
2) testing and providing data according standards of GB, ISO, JIS, ASTM, DIN, BS and other international standard.
sample of thin plate, panel, belt, foil, flat bar, wire, bar, proximate matter, pipe, sheet, square, round, rectangle, and annular shaped, cast iron, nonmetal alloy of cast iron, pipe section, proportional and non-proportional(index: k= 11.3 or 5.65), fully wall thickness of longitudinal and horizontal peeling strip, rectangle and round section.
3) tensile, compression and bending test with variety of material by adding gripper.
4) tensile, compression and bending test with variety of rubber, plastic, film and other nonmetal material
5) test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam
6) test with textile, food, medicine, cosmetic, biological material.
7) tensile, peeling and welding strength test with electronic component.
8) Peeling, bending and fastening property for PCB circuit board
9) test with wooden, paper, film production and other nonmetal material.
10) strain relaxation and adhesive strength test.
2 Specification
|
No. |
Item |
Specification |
|
1 |
Load capacity |
1kN/2kN/5kN/10kN/20kN |
|
2 |
Grade |
Grade of 0.5/1 |
|
3 |
range of force |
0.4%--100%FS (grade of 0.5) /1%--100%FS (grade of 1) |
|
4 |
Relative error of indicated value |
+/-0.5%(grade of 0.5)/+/-1.0(grade of 1) |
|
5 |
Resolution of force |
1/3000000FS without changed |
|
6 |
range of deformation |
0.2%--100%FS |
|
7 |
range of force speed |
0.005%--5%FS/S |
|
8 |
precision of force speed |
speed is less than 0.05%FS, between +/-1% of setting value.
speed is more than 0.05%FS, between +/-0.5% of setting value. |
|
9 |
range of deformation speed |
0.005%--5%FS/S |
|
10 |
precision of deformation speed |
speed is less than 0.05%FS, between +/-1% of setting value.
speed is more than 0.05%FS, between +/-0.5% of setting value. |
|
11 |
range of displacement speed |
0.001--600mm/min (customized high speed 0.001--2000mm/min) |
|
12 |
precision of displacement speed |
Between +/-0.2% of setting value |
|
13 |
range of constant force, deformation and displacement |
0.5%--100%FS |
|
14 |
precision of constant force, deformation and displacement |
set value is more than 10%FS, it is between ±0.5% of setting value.
set value is less than 10%FS, it is between ±1% of setting value. |
|
15 |
Effective test span |
400mm |
|
16 |
stroke of transom |
6000, mm |
|
17 |
voltage |
220V±10%, 50Hz(reliable landing) |
|
18 |
power |
400W |
|
19 |
Size of loading frame |
860*460*750 |
|
20 |
weight |
100kg |
|
