|
WDW-Y200/300 Computer Control Electronic Universal Testing Machine(double space / hydraulic gripper)
1 Introduction:
1) tensile, compression, bending, torsion, shearing testing and researching with variety of metal, nonmetal material and composite material under room temperature.
2)sample of thin plate, panel, belt, foil, flat bar, wire, bar, proximate matter, pipe, sheet, square, round, rectangle, and annular shaped, cast iron, nonmetal alloy of cast iron, pipe section, proportional and non-proportional(index: k= 11.3 or 5.65), fully wall thickness of longitudinal and horizontal peeling strip, rectangle and round section.
3) tensile, compression and bending test with variety of rubber, plastic, film and other nonmetal material
4) test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam.
5) test with textile, food, medicine, cosmetic, biological material.
6) tensile, peeling and welding strength test with electronic component.
7) test with wooden, paper, film production and other nonmetal material.
2 Standard
1) ISO 6892-1: Metallic materials-Tensile testing-Part1：Method of test at room temperature
2) ASTM E 8M-08.Standard Test Methods for Tension Testing of Metallic Materials [Metric]
3) BS EN10002-1: 2001Tensile testing of metallic materials. Method of test at ambient temperature.
4) ASTM E9-89a Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
5) ISO 7438: Metallic materials-Bend test
6) ISO 23718: Metallic materials - Mechanical testing - Vocabulary
3 Important specification
|
No. |
Item |
Specification |
|
1 |
load capacity |
200kN/300kN |
|
2 |
accuracy |
+/-0.5 |
|
3 |
range of load |
0.4% -- 100%FS |
|
4 |
relative error of indicated value |
+/- 0.5% |
|
5 |
resolution of force |
1/+/-300000F.S without change |
|
6 |
range of deformation |
0.2% -- 100% |
|
7 |
deformation relative error of indicated value |
between +/-0.5% of set value |
|
8 |
resolution of deformation |
1/+/- 300000 of Max. deformation |
|
9 |
range of large deformation extensometer |
10 – 800mm |
|
10 |
relative error of indicated value of large deformation extensometer |
between +/-0.5% of set value |
|
11 |
resolution of large deformation extensometer |
0.008mm |
|
12 |
relative error of displacement |
between +/-0.5% of set value |
|
13 |
resolution of displacement |
0.015μm |
|
14 |
range of force speed |
0.005 – 5%FS/S |
|
15 |
relative error of force speed |
between +/-1% of set value |
|
16 |
range of strain speed |
0.02 – 5%FS/S |
|
17 |
relative error of strain speed |
speed is less than 0.05%FS, between +/-2% of set value
speed is more than 0.05%FS, between +/-0.5% of set value |
|
18 |
range of transom speed |
0.001 – 600mm/min |
|
19 |
relative error of transom speed |
speed is less than 0.05%FS, between +/-1.0% of set value
speed is more than 0.05%FS, between +/-0.2% of set value. |
|
20 |
range of constant force, strain, displacement |
0.5% -- 100%FS |
|
21 |
precision of constant force |
set value is less than 10%FS, between +/-1% of set value.
set value is more than 10%FS, between +/-0.1% of set value. |
|
22 |
crosshead stroke |
1250mm/without grip, customizable |
|
23 |
test span |
610mm/customizable |
|
24 |
voltage |
380V+/-10%, 50Hz(reliable landing) |
|
25 |
power |
5.0kw |
|
26 |
size of frame |
1050*750*2600mm |
|
27 |
weight |
1800kg |
|
