|
LDS - 20/50/100 Hammer Drawing Force Testing Machine
1Important function
1) Test and research with hammerhead and hammer handle compounding drawing, separated drawing.
2) 6 angle, 8 angle, nipple shaped, fitter’s hammer, nail hammer, duckbilled hammer, drum hammer, test hammer, round shaped hammer.
3) Wooden handle nail hammer, English type of fibre handle nail hammer, English type of cone nail hammer.
4) Germany type of fitter’s hammer, Germany type of fibre handle fitter’s hammer, steel pipe handle fitter’s hammer, Germany type of steel pipe handle fitter’s hammer.
5) Engineer’s cross pein hammer, American eight angle, engineer’s cross pein hammer, American eight angle hammer(glass fibre handle),Carpenter’s hammer, electric welding hammer, bushhammer.
6) Test research for tensile, compression, bending, torsion, shearing test with metal, nonmetal and composite material under room temperature.
7) Test for property with thin metal, wire, fine wire, fiber, elastomer, foam.
8) Test for property with textile, food, medicine, cosmetic, rubber, plastic, thin film, biological material.
9) Test for tensile, peeling, welding strength with electronic components.
10) Test for peeling, bending, fastener property with printed circuit board.
11) Tensile test with wooden product, paper production, film.
2 Important specification
|
No. |
Item |
Specification |
|
1 |
Load capacity |
20kN |
30kN/50kN |
100kN/120kN |
|
2 |
Grade |
0.5/1 grade |
|
3 |
range of load |
0.4% -- 100%FS(grade 0.5)/1% - 100%FS(grade 1) |
|
4 |
resolution of force |
1/±200000F.S |
|
5 |
range of force speed |
0.005% -- 5% FS/s |
|
6 |
precision of force speed |
speed is less than 0.05%FS, between ±2% of set value.
speed is more than 0.05%FS, between ±1% of set value. |
|
7 |
range of deformation speed |
0.005 – 5%FS/s |
|
8 |
precision of deformation speed |
speed is less than 0.05%FS/s, between ±2% of set value.
speed is more than 0.05%FS/s, between ±1% of set value. |
|
9 |
range of displacement speed |
0.2 – 600mm/min(customizable high testing system: 2m/min &80in/min – 25m/min & 1000in/min) |
|
10 |
precision of displacement of speed |
speed is less than 0.5mm/min, between ±1% of set value.
speed is more than 0.5mm/min, between 0.5% of set value. |
|
11 |
effective test span |
410mm |
410mm |
510mm |
|
12 |
stroke of transom |
0 – 1100mm |
0 – 1100mm |
0 –1200mm |
|
13 |
power |
400w |
750w |
2000w |
|
14 |
size of load frame |
860*460*1800 |
970*640*1900 |
1050*640*2150 |
|
15 |
weight |
300kg |
500kg |
800kg |
|
16 |
voltage |
220V±10%, 50Hz(reliable landing) |
|
