NDW- 100N.m/200N.m Computer Control Electronic Material Torsion Testing Machine
1 important function
1) Torsion test and research with variety of material under room temperature.
2) Torsion test and research with metallic and nonmetallic material, component, composite material and biological component under room temperature.
3) Test and research with metallic and nonmetallic material, composite material and biological material for low cycling loading and fatigue life property.
4) Torsion test and research with cylinder, tubular, fiber, elastic, soft, plate, belt, foil, thin sheet, square, cylinder, rectangle and special shape of sample under room temperature.
5) Constant torque loading, torque grade by grade loading, torque, Max. Torque, troque strength, yielding strength, upper yielding strength, lower yield strength, torsion angle, rigidity of angle, specified non-proportional torsion strength, real torsion strength, Max. Non-proportional shearing strain, shear moldular and other mechanical property.
2 important specification.
1) Ergonomics designing, machine and human is suitable for each other with high efficient, healthy, safety.
2) Horizontal type loading frame with high rigidity and stability. Size is customized.
3) High precised symmetrical torque tranducer with wide linerity, well stability ensure test precision of torque loading.
4) Mute type AC servo motor with high speed, low vibration and free maintaining.
5) Inner placed ethernet joint: running and stopping at once, operation flexibble, switching freely.
6) Electricity board adopt photoelectric insulation with resistance to interference.
7) With variety of grip switched freely, optional environmental system and torsion meter.
8) Wide test speed set free between 0° -- 1080°/min.
9) Inner placed fully digital close loop, multiple channel and function, operation easily torsion test software. Variety of standard method(GB, GJB, ISO, JIS, ASTM, DIN, BS, NF, EN, AS, NBR, IEC, GOST, CNS)
10) Torque loading auto control, keeping, cycle control, self editing and other control mode.
11) Self calculating Max. Torque Tm, shear modulus G, specified non-proportional torsion strengthτp, up yielding strengthτeH, low yielding strengthτeL, torque strengthτm.
12) Auto tail after torque and angle of torque, real time display test curve, value of torque, angle of torque, speed of torsion.
13) Auto control of test procedure, fully close loop control and display torque, stress, deformation and torque angle, full key board input operation and control system.
14) Control mode setting intellgent without conflict, switching smoothly, loading and unloading smooth and steady.
15) Procedure reappearing and data reanalyzjing, curve is magnified, shrinked, compared and tranversal.
16) Multiple curve displayed at the same time, such as torque-time, torque-angle of torsion, angle-time. Self setting coodinate, full scale self adjusted.
17) Operation software adopt modularization, open editing, individual designing, self adjusted.
18) Standard module: limitation management module, test module, control module, analying module, counsel module, output module and so on.
19) Flexible Excel and Word report format, for choosing, appointing, sorting, combining, variety of outputing.
20) Operating and guiding function.
21) Website of data management, enable connecting with multiple company.
22) Return after test completeing with intellgent, efficient rapidly.
23) Multiple protective function: test over loading protective, over current and voltage, safety protective of breaking, hinting of operation protective, self protective after test completing.