news center

  Station Search


  Contact Us

About_content


 

Jinan Heng Rui Jin Testing Machine Co.,Ltd

Mobile: 86-186-6011-8227 

E-mail:violetliu@hotmail.com

E-mail: trade@hrjtest.com

Skype: besttester

Tel: 86-531-87103533

Fax: 86-531-87958608

Contacts: Susan

Website:

www.hrjtest.com

www.jnshiyanji.com/en


Industry News · Home > Industry News > 51mm Metal Pipes Bending Machine

51mm Metal Pipes Bending Machine


访问人数:224  新闻作者:Susan  新闻来源:  发布时间:2019/9/30 17:04:28
 

→51.0mm metal material pipe bending testing machine is used to measure the plastic deformation capacity of the full section bending of circular cross section metal pipe with outer diameter less than 51.0mm. Bend the unfilled tube sample to a specified angle to observe whether cracks, fissure, gap or layers occur in the steel tube.

→51.0mm metal pipe bending test at any angle from 0° to 90°, Full section bending test of 51.0mm metal pipe, 48.3mm scaffold steel tube full section bending test, 10° bending test of steel-plastic composite pipe, 30° bending test of steel-plastic composite pipe, 90° bending test of steel-plastic composite pipe, 6 times diameter bending test of metal pipe, 8 times diameter bending test of metal pipe,.


→33.7mm metal pipe bending tester, 42.4mm metal pipe bending test, 47.5mm steel tube bending test, 60.3mm steel pipe bending testing machine, 65mm metal pipe bending tester, 2000kN metal material pipe flattening machine, 2000kN steel tube flaring machine,1000kN steel tube tensile testing machine,120kN steel scaffold testing machine, 100N.m-2000N.m metal pipe torsion fatigue testing machine.

 


All rights reservedJinan Heng Rui Jin Testing Machine Co.,Ltd

Tel: 86-531-87103533 Fax: 86-531-87958608 E-mail: violetliu@hotmail.com