30kN缓冲垫板动静刚度疲劳测试系统，Q/CR785-2000高速铁路CRTS Ⅲ型板式无砟轨道橡胶弹性缓冲垫层疲劳试验方法。
→以恒定频率向CRTS Ⅲ型弹性垫层试样（尺寸为100mmx60mm）施加垂向循环荷载，经过3x106次荷载循环后，测定CRTS Ⅲ型弹性垫层的永久变形和静刚度变化率。
→向加载钢板施加5kN～25kN垂向循环荷载，加载频率4±1Hz，荷载循环3x106次。
→CRTS Ⅲ型弹性垫层3x106次荷载循环试验后，将被测弹性垫层试样取出。在23±2.0℃环境中静置24h。
→在疲劳前原测量位置测量被测弹性垫层试样厚度，取平均值作为疲劳后被测弹性垫层试样的厚度，按公式计算疲劳后厚度变化率。
→按照附录A的试验方法进行静刚度测试，测得疲劳后刚度，按公式计算疲劳后刚度变化率。
→CRTS Ⅲ弹性垫层疲劳试验机荷载30kN。疲劳试验空间≥200mm，位移变形0.01mm。
→试验波形：正弦波，实时显示疲劳荷载-位移曲线。HRJ弹性垫层加载钢板支撑钢板120x80x40mm。
→HRJ高刚性高稳定性、无振动冲击流线型载荷机架，人体工程学设计。
→HRJ-Test橡胶弹性材料伺服疲劳试验软件/可定制国际版。
→HRJFT-100kN垫板动刚度试验机，100x60x8mm垫板动刚度试验，测试垫板表面最大和最小位移量。频率3-5Hz，荷载不小于100kN,上加载钢板下支撑钢板厚度不小于40mm，三支千分表（位移传感器）。
→HRJFT-100kN垫板疲劳性能试验机，频率3-5Hz，荷载不小于100kN,振幅不小于3mm，经过300万次荷载循环后，测定永久变形和静模量变化。上加载钢板下支撑钢板厚度不小于40mm。
→HRJFT-100kN垫板静刚度试验机，100x60x8mm垫板静刚度试验，测试垫板表面在荷载作用下产生的位移量。荷载不小于100kN,上加载钢板下支撑钢板厚度不小于40mm，三支千分表（位移传感器）。计算静刚度。
→HRJFT-100kN弹簧隔振器静刚度试验机，隔振器直径20mm，上加载钢板下支撑钢板厚度不小于40mm，三支千分表（位移传感器）。
→HRJFT-100kN隔离式减振垫静模量试验机，样品300x300x厚度3件，上加载钢板下支撑钢板厚度不小于40mm，三支千分表（位移传感器）。
→HRJFT-100kN隔离式减振垫动模量试验机，样品300x300x厚度3件，最大荷载50kN,上加载钢板下支撑钢板厚度不小于40mm，三支千分表（位移传感器）。
→HRJFT-100kN隔离式减振垫疲劳性能试验机，样品300x300x厚度3件，频率3-5Hz，荷载不小于100kN,振幅3mm，经过1000万次荷载循环后，测定隔离式减振垫永久变形和静模量变化。上加载钢板下支撑钢板厚度不小于40mm。
→TB/T3329-2013/XG1-2023电气化铁路接触网隧道内预埋槽道》行业标准第1号修改单；TB/T2074-2020 电气化铁路接触网零部件试验方法；Q/CR 1001-2023电气化铁路接触网隧道内预埋槽道；GB/T41217-2021城市地铁与综合管廊用热轧槽道；GB/T 37613-2019预埋槽道型钢；TCAMET 02003-2017 城市轨道交通预埋槽道及套筒技术标准；预埋槽道本体的疲劳特性测试（TB/T3329-标准5.5.6）；（TB/T3329-5.5.7）500x500m预制混凝土槽道锚杆T型螺栓组合一体疲劳特性测试；GB/T38695-2020 城市轨道交通无砟轨道技术条件；附录G垫板动刚度附录F垫板静刚度附录H垫板疲劳性能；TB/T3514-2018客货共线铁路道岔用橡胶垫板；TB/T3515.4-2018弹性支承块式无砟轨道部件第4部分块下垫板；TB/T2344.1-2020钢轨第1部分43kg/m～75kg/m钢轨；TB/T2344.2-2020钢轨第2部分道岔用非对称断面钢轨；TB/T2344.3-2018E钢轨第3部分异型钢轨；TB/T3395.1-2015高速铁路扣件通用技术条件；UIC 864-5；JIS E 1117；TKTJ9904-1；TB/T3395.2-2015高速铁路扣件弹条Ⅳ型扣件；TB/T3395.3-2015高速铁路扣件弹条V型扣件；TB/T3395.4-2015高速铁路扣件WJ-7型扣件；TB/T3395.5-2015高速铁路扣件WJ-8型扣件；TB/T3396.1-2015高速铁路扣件系统钢轨纵向阻力的测定；TB/T3396.2-2015高速铁路扣件系统组装扣压力的测定；TB/T3396.3-2015高速铁路扣件系统组装静刚度的测定；TB/T3396.4-2015高速铁路扣件系统试组装疲劳性能试验；TB/T3396.7-2015高速铁路扣件系统预埋件抗拔力试验；TB/T1495-2020弹条I型扣件；TB/T3065-2020弹条II型扣件；TB 1389混凝土轨枕用每米43公斤钢轨橡胶垫板型式尺寸；TB/T456.2-2019/XG2-2025《机车车辆自动车钩缓冲装置第2部分自动车钩及附件》行业标准第2号修改单；HG/T3328-铁路混凝土枕轨下用橡胶垫板；TB/T3545-2019/XG1-2024《机车悬挂装置橡胶件》行业标准第1号修改单；TB/T2841-2019铁路车辆空气弹簧；GB/T21527-轨道交通扣件系统弹性垫板；JIS E4710；JIS E4206；JIS K6385；CNS 10067；CNS 10068；KS R9222-2014；KS M6726-2016；KS M6745；ONORM NS EN 13913Ed.1；ONORM UNI NS EN 13597；100kN橡胶弹性缓冲垫层静刚度动刚度疲劳试验机；减振垫板缓冲垫板动静刚度疲劳测试系统；弹簧隔振器橡胶隔振器动静刚度疲劳试验机；隔离式减振垫刚度疲劳试验机测试系统；弹性缓冲垫层动静刚度疲劳试验机系统；5kN橡胶伸张疲劳试验机；100kN轨道交通铁路隧道预埋槽道疲劳试验机；100kN接触网隧道内预埋槽道滑动荷载试验机；HRJ-100kN槽道抗拉抗剪测量仪；1500kN钢轨裂纹监测试验机；3000kN微机控制钢轨静弯曲试验机；ZDW-50kN铁路道岔转辙机挤脱力试验机；500kN电液伺服混凝土轨枕静载试验机；HRJ-100kN砌体通缝截面抗剪强度试验仪；HAT-3500N.m/650kN高强螺栓自动测试仪；200kN门式盘扣碗扣钢管脚手架扣件构件试验机；200kN钢管脚手架构件扣件试验机； JG 13-门式钢管脚手架；碗扣式盘扣式钢管支架构件试验机；VTM-3全自动砂浆竖向膨胀率测试仪；100kN水工混凝土轴向拉伸极限强度试验机；200kN超高性能混凝土抗拉强度试验机；3000kN全级配混凝土小梁弯曲试验机；20kN波纹管土工膜综合力学试验机；YZS-300kN混凝土抗弯拉强度试验机；墙体及吊顶轻钢龙骨静载冲击综合性能试验机；5kN波纹管纵向载荷试验机；全级配混凝土抗压强度试验机；100kN土工材料格栅综合力学性能试验机；500N水泥抗硫酸盐侵蚀抗折强度试验机；轨道交通运输车辆零部件质量检测系统；油浸式变压器波纹储油柜疲劳试验台；变压器波纹储油柜耐压试验变形自动检测装置；绝缘子拉压弯扭机械性能试验系统；高压电力绝缘子组件拉压弯扭机械性能测试系统；50kN架空配电线路悬垂线夹顺线握力试验装置；弹簧分选自动化智能测试系统；HRJ在线人造板材厚度自动测量系统；铁矿球团全自动压力试验机系统；弹簧压力试验自动化智能测试系统；
Buffer Pad Dynamic Static Stiffness Fatigue Test System; Vibration Isolating Pad Dynamic Static Stiffness Fatigue Tester；Buffer Pad Dynamic Static Stiffness Fatigue Test System；Spring Isolator Dynamic Static Stiffness Fatigue Test System；Rubber Isolator Dynamic Static Stiffness Fatigue Test System；Vibration Isolator Pad Dynamic Static Stiffness Fatigue Test System；Elastic Buffer Pad Dynamic Static Stiffness Fatigue Test System；Rubber Tension Fatigue Testing Machine；Rubber elastic layer of CRTS Ⅲ slab track for high-speed railway；The specification of rubber pads for turnout of passenger and freight railway line；Low vibration track components Block pad；43 kg/m～75 kg/m rails；Switch and crossing rails；Specification for Compromise Rails；Fastening systems for high-speed railway Part 1General requirement；Fastening systems for high-speed railway Part 2 Type IV fastening system；Part 3 Type V fastening system；Part 4 WJ-7 fastening system；Part 5 WJ-8 fastening system；Test methods for fastening systems of high-speed railway Part 1 Determination of longitudinal rail restraint；Determination for clamping force；Determination of static stiffness for fastening assembly；Test of fatigue performance of fastening assembly；Vertical load test for cast-in fastening components；Type I fastening system；Type II fastening system；Air spring for railway vehicle；Automatic coupler and draft gears for rolling stock. Part 2:Automatic couplers and accessories；Rubber pads for under railroad concrete sleepers；Elastic pads for rail transit fasten system；Rubber suspension components for locomotive；
Railway Tunnel Anchor Channel Bolt Fatigue Tester；Railway Tunnel Anchor Channel Bolt Sliding Load Tester；Steel Rails Crack Monitoring Tester；Steel Rails Static Loading Bending Testing Machine；Railways Switch Machines Squeeze Out Force Tester；Concrete Sleeper Static Loading Tester；Masonry Shear Strength Along Mortar Joints Tester；High Strength Bolt Automatic Testing System；Tester for Frame Scaffolding With Steel Tubules；Steel Tubular Scaffold Components Member Couplers Tester；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Tester；Vertical Expansion Rate Tester of Mortar；Hydraulic Concrete Axial Tensile Strength Tester；Ultra-high Performance Concrete Tensile Strength Tester；Fully-graded Concrete Flexural Strength Tester；Anti-glare Board Mechanics Properties Tester；Construction Mortar Tester；Wall Thermal Insulation Materials Tester；Gate-type Wall Thermal Insulation Materials Tester；Concrete Flexural Tensile Strength Tester；Wall Panel Light-gauge Steel Furring Load Impact Properties Tester；Corrugated Pipe Axial Load Tester；Fully-graded Concrete Compressive Strength Tester；Corrugated Pipe Ring Stiffness Geosynthetics Load Tester；Slip Coefficient of Faying Surface Tester；Mean Slip Coefficient Tester；Cement Flexure Strength Tester；Rail Transit Transport vehicles Component Quality Test System：Automated Intelligent Test System；Power Electronics Energy Power Electrical Engineering Test System；Construction Machinery Heavy Equipment Transport Vehicles Component Dynamic Fatigue Test System；Medical Engineering Medical Device Product Biological Materials Mechanical Test System；Servo Control Universal Material Horizontal Tensile Strength Tester；Rail Transit Highway Water Transportation Construction Material Engineering Quality Testing System； Steel Strand Relaxation Static Load Anchoring Tester；Tension Creep Rupture Strength Tester；Hydraulic Servo Constant Stress Compressive Tester；Hydraulic Jack Verification Reaction Frame Structural Multi-functional Test System；Laminated Veneer lumber Structural Timber Wood Mechanical Properties Test System；Metal Wire Material Bolt Connection Components Torsion Properties Tester；Spring Tension Compression Torsion Fatigue Stiffness Properties Tester；High-speed Tensile Testing Machine System；Electronic Universal Tension Compression Flexural Torsion Material Intelligence Test System；Steel Bar Steel Tube Metal Material Components Member Flexural Tester；Mechanics Calibration Verification Standard Machine；Oil-immersed Transformer Corrugated Oil Conservator Fatigue Test Bench；Special Custom Non-Standard New Scientific Research Test System；Overhead Line Spacers Grip Force Test Device；Spring Sorting Automated Intelligent Tester；Wood-based Panel Online Automatic Thickness Measurement System；Iron Ore Pellets Automatic Compression Tester；Spring Compression Force Intelligent Test System；
上一篇：3000N.m扭矩扳子检定仪Computer Control Torque Wrench Calibrator
下一篇：2N.m～50N.m扭矩起子扭力扳手检定仪 |
