首页 >> 新闻中心 >> STM-200kN脚手架扣件构件试验机恒瑞金 Scaffolding Couplers Testing Machine
STM-200kN脚手架扣件构件试验机，用于D48.3mm/60.3mmPKJ承插型盘扣式脚手架连接盘单侧抗剪强度试验、连接盘双侧抗剪强度试验/双侧弯剪强度试验、连接盘抗弯强度试验、连接盘抗拉强度试验、连接盘内侧环焊缝抗剪强度试验、可调托撑和可调底座抗压强度试验。D48.3mm碗扣式钢管脚手架上碗扣强度试验、下碗扣焊接强度试验、横杆接头强度试验、横杆接头焊接强度试验、KDZ可调支座抗压强度试验。D48.3mm/51.0mm钢管脚手架直角扣件抗滑性能试验、抗破坏性能试验、扭转刚度性能试验，旋转扣件抗滑性能试验、抗破坏性能试验，对接扣件抗拉性能试验，底座抗压性能试验。
5kN脚手架扣件扭转刚度试验测试，钢管横向安放，方便安装，快捷高效；不做此试验时，可将伸长部分旋转到机器后面，减少占用空间，人员行走安全。全数字HRJ-Test脚手架扣件构件试验测控软件/可定制英文版；多种标准方法（GB、GJB、ISO、JIS、ASTM、DIN、BS、NF、EN、AS、NBR、IEC、GOST、CNS、APA)。
STM-200kN脚手架扣件构件试验机，高刚性高稳定性、无振动冲击流线型门式载荷机架。高速率低振动、免维护静音型、交流伺服电机驱动系统。50kN100kN钢管脚手架扣件力学性能附具。100kN120kN碗扣式钢管脚手架构件强度试验附具。150kN200kN盘扣式钢管支架构件强度试验附具。0.001mm数字千分表直接接入计算机采集处理脚手架扣件抗滑变形。
GB 15831钢管脚手架扣件；GB 24911-2010碗扣式钢管脚手架构件；JG/T503-2016承插型盘扣式钢管支架构件；GB 24910-2010钢板冲压扣件；HRJ Tester；JGJ/T414-2018建筑施工模板和脚手架试验标准；JG/T13-1999门式钢管脚手架；T/CMRA 01-2016承插型键槽式钢管脚手架；建筑工程轮扣式钢管脚手架安全技术规程；JIS A8951；JIS B0151-2018；ANSI/SSFI SC100；BS 1139-1.2；EN 12812；DIN BS NF EN 74-1；DIN BS NF EN74-2；SN EN 39-2001；JGJ 166-2016；JGJ 130-2011；JGJ 231-2010；JGJ 128-2010；JGJ 164-2008；JGJ 183-2009；JGJ 202-2010；JGJ 254-2011；GB 50068-2018；HRJ Tester；T/CEC 211-2019；TB/T2292；JC/T2287-2014；DL/T1209.4-2014E；CB 4204-2012；SH/T3555-2014；GB/T3091-2015；
300kN门式钢管脚手架试验机；B标准型盘扣式钢管支架试验；Z重型盘扣式钢管支架试验机；碗扣型多功能脚手架构件试验机；快装脚手架力学性能试验机；支撑架立杆抗压承载力试验机；脚手架横杆抗弯承载力试验机；井架扣件强度性能试验机；hrjtest；构件节点抗拉承载力试验机；脚手架节点抗压承载力试验机；脚手架节点抗剪试验机；脚手架节点抗弯承载力试验机；脚手架节点抗扭承载力试验机；脚手架托座抗压承载力试验机；jnshiyanji；斜杆单元承载力试验检测；支撑架重物堆载试验机；
Steel Tube Scaffold Couplers Testing Machine；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Testing Machine；HRJ Tester；Steel plate punched coupler；Standard for test of construction formwork and scaffold；Safety and technical code for frame scaffoldings with Buckles Bowl in construction；Technical code for safety of steel tubular scaffold with couplers in construction；HRJ Tester；Technical specification for safety of disk lock steel tubular scaffold in construction；Technical specification for construction safety of steel scaffold building in petrochemical industry；Glass fiber reinforced plastic quick-erectable mobile scaffolding made of prefabricated elements；HRJ Tester；Safety requirement for scaffold of shipyard；Specification for Substation Ascending Operation and Protective Device；Composite Quick-installed Scaffold；Welded steel pipes for low pressure liquid delivery；Tubular steel scaffolds；Standards for Testing and Rating Scaffold Assemblies and Components；Metal scaffolding Tubes Specification for Aluminium tube；False work-Performance requirements and general design；Couplers, spigot pins and base plates for use in false work and scaffolds；Couplers for tubes-Requirements and test procedures；HRJ Tester；Special couplers Requirements and test procedures；Couplers spigot pins and base plates for use in false work and scaffolds Special couplers；hrjtest；Loose steel tubes for tube and coupler scaffolds-Technical delivery conditions；Requirements and test procedures；HRJ Tester；Technical code for safety of frame scaffoldings with steel tubules in construction；Technical code for safety of wooden scaffold in construction；Technical code for safety of implementation scaffold practice in construction；Frame scaffolding Testing Machine；Door-type Steel Pipe Scaffolding Tester；Tubular Steel Frame Scaffolding；Steel tube Scaffolding Member Testing Machine；
济南恒瑞金试验机有限公司；钢管脚手架构件扣件力学性能试验机；力值硬度计量专业委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
|
