首页 >> 试验机案例 >> 2000N.m500kN全自动螺栓测试仪High Strength Bolt Automatic Tester
2000N.m500kN全自动螺栓测试仪用于M12～M30大六角头高强螺栓连接副轴向力试验、扭矩试验、扭矩系数复验；M16～M30扭剪型高强度螺栓预拉力复验、副施工扭矩检验。测试螺栓扭矩2000N.m/0.1N.m，螺栓轴力500kN/0.1kN，螺栓长度40mm～280mm。自动计算螺栓平均轴力、平均扭矩、平均扭矩系数、标准偏差和变异系数。具备螺栓连接副抗滑移初拧和终拧辅助装置。HRJ高刚性、高稳定性、无振动冲击流线型卧式载荷机架；可拆装式滚轮移动装置、刹车定位、轻巧方便。
 2000N.m500kN全自动螺栓测试仪；0.5N.m～50kN.m螺栓高低温扭转试验机；10kN.m～50kN.m高强螺栓连接副扭矩试验机；2kN.m～40kN.m预载荷螺栓连接副试验机；500N.m200kN在线螺栓扭矩轴力试验机；1000kN～5000kN高强螺栓卧式拉伸试验机；2000kN无振动螺栓拉伸试验机；3000kN高强螺栓抗拉强度试验机；6500kN螺栓紧固件轴力试验机；ASTM F3125−2015；ASTM A307-2017；ASTM A183；ASTM A563-2015；ASTM.A320M-2015；ASTM A354-2011；ASTM A325-2014；ASTM F959；ASTM F2437；CNS 12209；JIS B1009-2014；JIS B1166；EN 14399；EN 16047；DIN 103；DIN 2510-5；DIN 558；DIN 601；DIN 931；DIN 933；DIN 960；DIN 961；ISO 898-1；NF E25-036；ISO/TR 16224；GB/T32076.1-2015；hrjtest；GB/T32076.3-2015；GB/T32076.4-2015；GB/T32076.5-2015；GB/T32076.6-2015；GB/T32076.7-2015；GB/T32076.8-2017；hrjtest；GB/T32076.9-2017；GB/T32076.10-2018；GB/T6170-2015；GB/T3106-2016；GB/Z32564-2016；GB/T192；GB/T1228；GB/T1229；GB/T1230；GB/T1231；GB/T5782-2016；GB 50205-2017；GB/T32076.2-2015；NB/T31082-2016；GB/T3632；GB/T16823.3；GB/T3098.1-2010；
High Strength Bolt Automatic Tester；hrjtest；Preloading High-Strength Structural Bolting Assemblies Test；Bolting Assemblies Torque Coefficient Test；Torque Clamp Force Testing；Wind Turbine Bolting Assemblies Test；Bolting Axial Force Test；Bolting Torque Test；Bolting Torque Coefficient Test；Coefficient of friction between bearing surfaces under nut or bolt head；Coefficient of friction between threads；Coefficient of total friction；High-strength structural bolting assemblies for preloading；Suitability for preloading；System HR-Hexagon bolt with large width across flatsand nut assemblies；hrjtest；System HV-Hexagon bolt with large width across flats and nut assemblies；Torshear type bolt with cup head，and nut assemblies；Torshear type bolt with hexagon head with large width across flats,and nut assemblies；High strength bolts with large hexagon head for steel structures；High strength plain washers for steel structures；Width Across Flats For Hexagon Products；High-Strength Bolting Assemblies For Tower on Wind Turbine；hrjtest；Specifications of high strength bolts with large hexagon head,large hexagon nuts；Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures；Code for acceptance of construction quality of steel structures；Fasteners-Torque clamp force testing；Mechanical properties of fasteners-Bolts；Measuring method for friction coefficient of screw thread pair of automobiles；Sets of high strength torque control bolt；Fasteners Bolts screws and studs Nominal lengths and thread lengths；hrjtest；High-Strength Structural Bolting Assemblies For Preloading；Bolted Connections with Reduced Shank；standard specification for carbon steel track bolts and nuts；Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service；Standard Specification for High Strength Structural Bolts；120ksi(830MPa) and 150ksi(1040MPa) Minimum Tensile Strength；
济南恒瑞金试验机有限公司；螺栓扭转轴力拉伸试验机；力值硬度计量专业委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
|
