首页 >> 新闻中心 >> GB/T11546.1塑料拉伸蠕变试验机Plastic Tensile Creep Tester
GB/T11546.1塑料拉伸蠕变试验机,测定在预处理、温度和湿度等给定的条件下塑料标准试样拉伸蠕变。完成塑料标称伸长蠕变试验,标称拉伸蠕变应变试验,蠕变模量测定,硬质塑料拉伸蠕变试验,纤维增强塑料拉伸蠕变试验,哑铃薄片塑料拉伸蠕变试验。HRJ Tester;塑料蠕变计算总载荷包括预载荷,蠕变温度和湿度控制记录,拉伸蠕变结果三维表示。绘制蠕变曲线,蠕变模量-时间曲线,等时应力-应变曲线,蠕变断裂曲线。塑料拉伸蠕变随试样制备、试样尺寸和试验环境的不同将发生很大改变。塑料拉伸蠕变性能用于工程设计,则应在较大范围的内应力、时间和环境条件下对塑料材料进行试验。
500N~50kN塑料拉伸蠕变试验机;10kN~100kN高温蠕变持久试验机;200kN/300kN蠕变持久强度试验机;半硬质塑料拉伸蠕变试验机;非增强塑料拉伸蠕变试验机;HRJ Tester;填充塑料拉伸蠕变试验机;高温拉伸蠕变试验机;玻璃纤维增强塑料板材弯曲蠕变性能试验;蜂窝夹层塑料弯曲蠕变试验机;塑料力学性能可比多点数据的获得和表示;电子持久强度试验机;机电伺服蠕变试验机;合成纤维拉伸蠕变试验机;玻璃纤维拉伸蠕变试验机;涂层织物拉伸蠕变试验机;片状板状缓冲材料蠕变特性试验;块状缓冲材料蠕变特性试验;荷载持续时间效应和蠕变性能检验评价;jnshiyanji.com;塑料三点弯曲蠕变试验;聚乙烯环境应力开裂(ESC)测定;高温蠕变试验机;19.060机械试验;N72非金属材料试验机;Q23纤维增强复合材料;83.120增强塑料;
GB/T32682-2016塑料全缺口蠕变试验(FNCT);JC/T2312-2015非金属密封材料用蠕变松弛率试验机;GB/T 20671.5-2006垫片材料蠕变松驰率试验方法;HRJ Tester;JC/T 778-2010玻璃纤维增强塑料板材和蜂窝夹层结构弯曲蠕变试验方法;GB/T11546.1-2008塑料拉伸蠕变;GB/T1040.1-2006 塑料拉伸性能的测定;GB/T1040.2-2006模塑和挤塑塑料的试验条件;GB/T2918-2018 塑料试样状态调节和试验的标准环境;GB/T16825.2-2018拉力蠕变试验机施加力的检验;jnshiyanji.com;JB/T9373-2014拉力蠕变试验机技术条件;JB/T12276-2015电子蠕变松弛持久试验机;
GB/T1034-2008;GB/T19467.1;GB/T15048;GB/T20672;GB/T19242;GB/T14745-2017;GB/T32983-2016;GB/T37564-2019;GB/T30710-2014;GB/T31291-2014;LY/T1975-2011;GB/T2039-2012;JJG 276;YS/T1266-2018;FZ/T60037-2013;ISO 899-1;HRJ Tester;ISO 16770;ISO 62;ISO 527-1;ISO 527-2;ISO 472;ISO 291;ISO 8013;ISO 10350-1;ISO 11403-1;ISO 204:ISO 7500-2;ISO 7850-86;ASTM E1012-2014;ASTM E139;
Plastic Tensile Creep Tester;Test method of creep performance for dipped cords;Creep relaxation test machine for nonmetallic sealing material;Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core;Plastics Determination of environment stress cracking (ESC) ;Polyethylene-Full-notch creep test (FNCT);Plastics-Standard atmospheres for conditioning and testing;jnshiyanji.com;Plastic-Determination of creep behaviour Tensile creep;Metallic materials Uniaxial creep testing method in tension;Verification Regulation of High-Temperature Creep and Stress-Rupture Testing Machines;Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application;Verification of Static Uniaxial Testing Machines;Tension Creep Testing Machines;HRJ Tester;Verification of the Applied Force;Electronic Creep Tester;Electronic Relaxation Stress Tester;Rupture Strength Testing Machine;Coated fabrics for membrane structures-Test method for tensile creep;Cellular plastics rigid-Determination of compressive creep;Rubber vulcanized-Determination of creep in compression or shear;Standard Test Methods for Conducting Creep; Creep-Rupture and Stress-Rupture Tests of Metallic Materials;Test method of creep properties for package cushioning material;jnshiyanji.com;Standard for evaluation of duration of load and creep effects of wood and wood-based products;Creep Rupture Strength Tester;High-temperature Creep Tester;Creep elongation time;Plastic elongation time;Creep rupture time; Percentage creep elongation;Percentage initial plastic elongation;Percentage elongation after creep rupture;Creep curve;Initial stress;Rate of creep;Various Testing Machine;Laboratory Equipment;China Material Tester;World Material Tester;Mechanics Tester Manufacturer;Tester Service Center;Tester Fittings Supply Center;Design and Manufacture Center;Special Test Accessories;
济南恒瑞金试验机有限公司;蠕变持久试验机制造商;山东省力值硬度计量委员
(试验机服务中心)(试验机配件供应中心)(特殊夹具定制中心)
|