|
|
 |
| |
首页 >> 新闻中心 >> 结构用集成材力学特性试验机Structural Timber Characterization Tester
300kN结构用集成材力学特性试验机用于集成材规格材力学性能试验、木结构部件力学性能试验、框架部件力学性能试验、LVL层积木力学性能试验、PSL平行积成木力学性能试验、胶合层积木力学性能试验。300kN结构用集成材力学特性试验机符合GB/T26899-2022结构用集成材。
300kN单板层积材力学性能试验机；LVL层积材抗弯强度试验机；胶合层积板材弹性模量试验机；木结构规格材弹性模量试验机；APA PS 1-09厚度方向抗剪强度试验夹具；AS/NZS 4357.2结构单板层积材LVL结构性能试验方法测定；AS/NZS 4063.1结构木材的特性试验方法；AS/NZS 4266.0人造木基板材测试方法标准；AS/NZS 4266.5弯曲强度和弯曲模量；AS/NZS 4266.6内结合强度；AS/NZS 4266.7表面结合强度；AS/NZS 4266.10湿弯强度；AS/NZS 4266.11循环后内结合强度和弯曲强度；AS/NZS 4266.13握螺钉力；AS/NZS 4266.20耐磨性；AS/NZS 4266.24耐开裂性；AS/NZS 4266.27冲击性能；AS/NZS 4266.28粘合强度；AS/NZS 2098.3弯曲强度；AS/NZS 2269.1 7.2弹性和刚性模量；轻型木结构连接件通用技术条件轻型木桁架技术规范；结构胶合层压板强度等级测定；装配式木结构建筑技术荷载规范；地板系统木框胶粘剂强度试验机；建筑工程方木原木结构设计；受弯木结构力学性能检验方法；轻型木结构锯材用原木检验；木结构工程施工质量验收规范；结构用木材强度等级检验测试；木结构试验方法；轻型木结构用指接规格材；规格材材质等级检验方法；结构用集成材理化力学性能试验机；带矩形横截面的强度分级结构木材结构木材机械性能测定；木基紧密板材机械力学性能试验机；热带硬木强度分级；石膏板系统用机械紧固件试验方法；石膏纤维板力学性能试验机；胶合板结构规格力学试验机；胶合板韧性试验机；胶合板屋面板弯曲强度试验机；木材物理力学试验方法；木材抗弯强度弹性模量测定；木材顺纹抗剪抗拉强度试验；木材硬度抗劈力试验；木材横纹抗压弹性模量测定；木质地板胶合板力学试验机；结构用人造板刨花板物理力学试验机；结构用木质复合材产品力学性能试验机；结构用锯材力学性能试验机；结构用人造板材料力学荷载强度性能试验机；结构用木质覆面板保温墙体试验方法；木结构剪力墙静载和低周反复水平加载试验方法；指接材用结构胶黏剂胶合性能测试方法；木结构销类紧固件屈服弯矩试验机；结构用木材金属紧固件连接试验；结构材纵接性能的测试方法；300kN结构木材集成材力学特性试验机；300kN规格材拉压弯剪强度性能试验机；600kN木结构原木板材力学性能试验机；大跨度木材人造板抗弯强度试验机；1000kN木结构荷载强度试验机；50kN微机控制人造板材试验机；10kN胶合纤维人造板力学试验机；20kN木工板木质地板结构板力学试验机；100kN集装箱木板材力学试验机；200kN脚手架木模板力学强度试验机；结构木材力学性能试验荷载10kN20kN30kN50kN100kN200kN300kN；拼装式胶合板箱力学试验机；AS/NZS 4063.1:2010；ANSI/AITC A 190.1；HRJ Tester；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；HRJ Tester；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；Structural Timber Characterization Tester；HRJ Tester；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；HRJ Tester；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；HRJ Tester；Structural laminated veneer lumber (LVL) Test methods；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；Log for lumber in light wood frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Tension Strength Hydraulically Operated Fixture；
|
|
|
| |
