|
|
 |
| |
首頁 >> 新聞中心 >> HRJ-500kN電子加載疊加力標准機(壓式) Electronic Loading Build-up Force Standard Machine
HRJ-500kN電子加載疊加力標准機(壓式) ,用于各種承重傳感器和電阻應變式力傳感器的檢定和校准；金屬絲式、箔式、薄膜式、應變管式、應變梁式、組合式荷載傳感器的檢定和校准；對測力環、測力計等工作測力儀進行檢定和校准；對各種規格和級別的壓縮試驗儀、顆粒強度測試儀等專用工作測力機進行檢定和校准；對其他專用測力裝置進行檢定和校准；計量檢測、工業生産、水利水電、鐵路交通、智能建築、航空航天、軍工科研、石化化工、機械冶金、油井管道、電力電器、船舶制造等研制、生産、使用中各類稱重傳感器(靜態質量)、壓力負荷傳感器。控制系統自動采集並記錄被檢測力儀的輸出值，逐點完成檢測、校准。
→HRJ電子加載疊加力標准機由載荷力機架、標准測力傳感器、測控系統組成；
→精密無間隙滾珠絲杠、高剛性高穩定性的門式力載荷機架，機架尺寸可定制。
→伺服測控系統,確保高精高效、低噪音、快速響應, 實現對試驗的自動控制。
→內置式全數字閉環、多通道、多功能、易操控的HRJ-Test力標准機控制軟件,多種力單位切換(N；kN；kg；T等)。
→最大載荷力500kN，測量範圍10%～100%F.S，載荷力分辨力≤0.001%F.S，准確度等級0.02；
→靈敏限r≤0.03%，力值重複性R≤0.03% F.S，力值誤差S≤0.02% F.S；
→30s負荷波動性0.015％F.S，力值保載時間≥30min，加載速度0.001～100mm/min；
→載荷力機架有效跨度800x800mm/可定制，上下壓板間距離800mm/可定制；
JJG 734-力標准機檢定規程；GB/T7551-稱重傳感器；JB/T14733-2024 65Mn鋼制稱重傳感器彈性體熱處理技術要求；JJG 669-2003稱重傳感器檢定規程；NB/T10164-2019礦用稱重傳感器通用技術條件；GB/T18459-傳感器主要靜態性能指標計算方法；GB/T7665-傳感器通用術語；GB/T18806-電阻應變式壓力傳感器總規範；GB/T15478-壓力傳感器性能試驗方法；GB/T7666-傳感器命名法及代碼；5000N.m扭矩扳子套筒扳手檢定儀；500N.m便攜式扭矩扳子檢定儀；10000N.m多功能工具旋具測試檢定系統；10kN～500kN單壓式電子加載疊加力標准機；500kN～2000kN液壓式四立柱拉壓疊加式力標准機；5kN～300kN拉壓式工作測力儀校准檢定裝置；1000kN拉壓式測力校准檢定系統；TCV-300kN傳感器校准檢定裝置；100kN鐵路接觸網張力測量儀校准裝置；100N～20000kN(20MN)便攜式測力儀；JJG 455-工作測力儀檢定規程；JJF 1134-專用工作測力機校准規範；JJG 2045-力值(≤1MN)計量器具檢定系統表；固定式力標准器；靜重式杠杆式力標准器；液壓式疊加式力標准器；便攜式力標准器；JJG 144-標准測力儀檢定規程；應變式標准測力儀；JJG 1116-疊加式力標准機檢定規程；JJG 2066-大力值計量器具檢定系統表；JJG 391-力傳感器檢定規程；JJF 1011-力值與硬度計量術語及定義；ISO 376；GB/T13634-金屬材料單軸試驗機檢驗用標准測力儀的校准；1MN～50MN力值校准標准器具；100t電子加載疊加力標准機；10MN液壓加載疊加力標准機；三缸全自動鋼筋正反向彎曲試驗機；40mm全自動鋼筋正反向彎曲試驗機；500kN電液伺服材料彎曲試驗機；150mm鋼板鋼帶180°彎曲試驗機；603金屬材料管塑性變形彎管試驗機；65mm鋼管彎曲專用彎管試驗機；51mm金屬材料管彎曲試驗機；10mm金屬線材反複彎曲試驗機；1000kN玻璃彎曲強度試驗機；200kN汽車防撞鋼梁板彎曲強度試驗機；
Electronic Loading Build-up Force Standard Machine；Verification Regulation of Force Standard Machines；Load cells；Technical requirements of heat treatment for 65Mn steel spring elements for loadcells；General specifications for mine weighing senor；General terminology for transducers；Test methods of the performances for pressure transducer sensor；Nomenclature and code for transducers；Methods for calculating the main static performance specifications of transducers；General specification for the resistance strain pressure transducer sensor；Mechanics Calibration Verification Standard Machine；Torque Socket Wrenches Wrench Calibrator；Portable Torque Wrench Calibrator；Manual loading Torque Wrench Calibrator；Hardware Tools Torque Testing and Calibration System；Calibration Verification Dynamometer；Load Calibration Verification System；Force Sensor Calibration Verification Dynamometer；Railway Overhead Lines Tension Tester Verification Device；Portable Dynamometers；Verification Regulation of Working Dynamometers；Calibration Specification for Working Force Measuring Machines for Special Purposes；Measuring Instruments for Force(≤1MN)；Verification Regulation of Standard Dynamometers；Verification Scheme of Measuring Instruments for Large Force；Verification Regulation of Build-up Force Standard Machines；Terminology and Definitions for Metrology of Force and Hardness；Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines；Laminated Veneer lumber Structural Timber Wood Mechanical Properties Test System；LVL Structural Timber Mechanical Properties Tester；Structural Glued Laminated Timber Tensile Compressive Strength Tester；Wood Timber Artificial Board Tester；Wood-based Panels Large Span Flexural Tester；Impact Tester of Wood-based Panels；Structural Timber Characterization Tester；Dimension Lumber Characterization Tester；Assembled plywood case Mechanical Properties Tester；Scaffold decking components Mechanical Properties Tester；testing in shearing strength parallel to grain of wood；Laminated veneer lumber Mechanical Properties Tester；
|
|
|
| |
