首頁 >> 新聞中心 >> 鋼木結構集成材柱梁力學性能試驗機Structural Timber Characterization Tester
鋼木結構是現代鋼結構與傳統的木結構相結合的一種混合結構方式。柱梁等受力構件采用鋼結構型式，外包采用木結構型式。廳堂館所吊頂、門窗、欄杆、樓梯等均用鋼木結構，既具有傳統建築風格，又堅固耐用，已被廣泛采用。鋼木結構建築物被賦予一種獨有的語義內涵。
結構木材集成材柱梁力學性能，使用多塊木材，借助粘合劑，經過壓力，加工制作的構件，力學性質大大增強。結構木材集成材采用SE構法、SE工法制作。木質集成材構件、鋼制連接件、鋼制螺栓、鋼制銷子，組成木結構承重框架，集成材構件橫斷面損失較少，力學性能較好。傳統的卯榫結構，木材構件橫斷面損失較大，力學性能較差。
300kN結構木材力學特性試驗機測試木材順紋抗拉強度、橫紋抗拉強度、順紋抗壓強度和彈性模量、木材順紋抗剪強度、接縫抗剪強度、木材彎曲強度和彈性模量。測試木材垂直抗壓承載力、木材抗拉承載力、木材橫向承載力、木材扭轉剛度。300kN結構木材拉伸試驗采用液壓夾具自動夾持，測定木結構部件拉伸性能、框架部件拉伸性能、LVL層積木拉伸性能、PSL平行積成木拉伸性能、膠合層積木拉伸性能、規格材拉伸性能、原木材拉伸性能。hrjtest；測定木結構部件壓縮性能、木結構部件扭轉特性、木結構部件抗剪性能。規格材材質等級檢驗方法；木結構試驗方法；木材強度等級檢驗方法；建築結構荷載規範；受彎木結構力學性能檢驗方法；木基結構板材力學性能指標；jnshiyanji；集成材理化性能試驗方法；木結構工程施工質量驗收規範；膠合木結構技術規範；規格材目測分級規則；木結構設計標准；建築工程方木原木結構設計；建築工程輕型木結構設計；原木及板材材質標准；建築工程承重膠合木結構設計；原木鋸材批量檢查抽樣判定方法；多高層木結構建築技術標准；裝配式木結構建築技術標准；輕型木結構用指接規格材；輕型木結構連接件通用技術條件；輕型木結構鋸材用原木檢驗；hrjtest；輕型木桁架技術規範；應力分級木材；300kN木結構規格材彎曲強度特性試驗機；300kN結構木材抗剪強度試驗機；600kN原木板材木結構力學性能試驗機；jnshiyanji；120kN大跨度長試件木材力學強度試驗機；200kN集成材力學性能試驗機； 1000kN木結構荷載強度試驗機；2kN石膏板斷裂荷載硬度試驗機；20kN防火板萬能試驗機；20kN門窗型材角強度試驗機；1500mm門窗型材落錘沖擊試驗機；MJL-10紙面石膏板沖擊性能測定儀；大跨度瓷磚板材抗折強度試驗機；建築砂漿保溫節能材料試驗機；防火門閉門器可靠性試驗機；AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；hrjtest；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；hrjtest；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；
Structural Timber Characterization Tester；hrjtest；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Structural laminated veneer lumber (LVL) Test methods；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；hrjtest；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；hrjtest；Code for design of timber structures；Visual grading rules for dimension lumber in light wood frame construction；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；jnshiyanji；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Tension Strength Hydraulically Operated Fixture；Standard for methods testing of timber structures；Gypsum Board Breaking Load Hardness Tester；Fire-proof plate Testing Machine；(PVC-U)Angle Strength Testing Machine；Falling Ball Impact Tester；Gypsum Plate Board Falling Ball Impact Tester；
|
