首頁 >> 新聞中心 >> 3000N.m螺栓摩擦系數試驗機Coefficient of Total Friction Tester
3000N.m螺栓摩擦系數試驗機用于螺栓連接副螺紋摩擦系數、螺栓支撐面摩擦系數、螺母支承面摩擦系數、總摩擦系數性能測定及研究。
3000N.m螺栓摩擦系數試驗機；3000N.m支撐面摩擦系數試驗機；3000N.m螺母摩擦系數試驗機；3000N.m螺栓連接副摩擦系數試驗機；HRJ Tester；3000N.m摩擦型螺栓扭矩試驗機；3000N.m承壓型螺栓試驗機；3000N.m抗拉型螺栓系數試驗機；3000N.m扭剪型螺栓系數試驗機；3000N.m大六角螺栓摩擦系數試驗機；3000N.m方頭螺栓摩擦系數試驗機；HRJ Tester；3000N.m預載荷螺栓摩擦系數試驗機；3000N.m汽車螺栓摩擦系數試驗機；3000N.m船舶螺栓摩擦系數試驗機；3000N.m橋梁螺栓摩擦系數試驗機；3000N.m風電螺栓摩擦系數試驗機；3000N.m軌道交通螺栓系數試驗機；3000N.m航空螺栓扭矩試驗機；3000N.m起重螺栓摩擦系數試驗機；3000N.m傳動螺栓拉扭試驗機；3000N.m鐵塔螺栓摩擦系數試驗機；3000N.m鋼結構螺栓摩擦系數試驗機；3000N.m建築栓接連接副試驗機；3000N.m栓接連接副摩擦系數試驗機；單一栓接連接副試驗機；HRJ Tester；2000N.m高強螺栓扭矩試驗機；40kN.m螺栓連接副扭矩試驗機；2000N.m高強螺栓拉扭試驗機；1000kN高強螺栓拉伸試驗機；GB/T32076.2-2015預載荷高強度栓接結構連接副；GB/T16823.3緊固件扭矩-夾緊力試驗；NB/T31082-2016風電機組塔架用高強度螺栓連接副；GB/T3632鋼結構用扭剪型高強度螺栓連接副；60000psi碳鋼螺栓扭矩試驗機；120ksi鋼螺栓扭矩試驗機；HRJ Tester；30kN.m螺栓高低溫扭轉試驗機；
Coefficient of Total Friction Tester；Coefficient of Friction Between Threads Tester；Coefficient of Friction Between Bearing Surfaces Under Nut or Bolt Head；High Strength Bolt Connection Torsion Testing Machine；HRJ Tester；Preloading Structural Bolting Assemblies Test System；High strength bolt Automatic Testing System；High Strength Bolt Horizontal Tensile test System；High Strength Bolt Tensile Tester；High strength bolt Axial Force Testing；High Strength Structural Bolting Assemblies Test；Preloading High Strength Structural Bolting Assemblies Test；Bolting Assemblies Torque Coefficient Test；Torque Clamp Force Testing；Wind Turbine Bolting Assemblies Test；Bolting Axial Force Test；Bolting Torque Coefficient Test；High-strength structural bolting assemblies for preloading；System HR-Hexagon bolt with large width across flats and nut assemblies；System HV-Hexagon bolt with large width across flats and nut assemblies；M39～M64 Hexagon bolt with large width across flats and nut assemblies；Fasteners-Torque clamp force testing；HRJ Tester；Mechanical properties of fasteners-Bolts；High-Strength Structural Bolting Assemblies For Preloading Suitability For Preloading；Sets of high strength torque control bolt；Measuring method for friction coefficient of screw thread pair of automobiles；120ksi(830MPa) and 150ksi(1040MPa) Minimum Tensile Strength；Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Material Testing Machine；Various Testing Machines；Laboratory Equipment；Test Accessories Design Manufacture Center；Special Test Accessories Center；China Material Tester；Asia Material Tester；World Material Tester；HRJ Testing Machine；
濟南恒瑞金試驗機有限公司；螺栓力學試驗機制造商；山東省力值硬度計量委員
（試驗機服務中心）（試驗機配件供應中心）（特殊夾具定制中心）
|
