首頁 >> 新聞中心 >> GB/T11546.1塑料拉伸蠕變試驗機Plastic Tensile Creep Tester
GB/T11546.1塑料拉伸蠕變試驗機，測定在預處理、溫度和濕度等給定的條件下塑料標准試樣拉伸蠕變。完成塑料標稱伸長蠕變試驗，標稱拉伸蠕變應變試驗，蠕變模量測定，硬質塑料拉伸蠕變試驗，纖維增強塑料拉伸蠕變試驗，啞鈴薄片塑料拉伸蠕變試驗。HRJ Tester；塑料蠕變計算總載荷包括預載荷，蠕變溫度和濕度控制記錄，拉伸蠕變結果三維表示。繪制蠕變曲線，蠕變模量-時間曲線，等時應力-應變曲線，蠕變斷裂曲線。塑料拉伸蠕變隨試樣制備、試樣尺寸和試驗環境的不同將發生很大改變。塑料拉伸蠕變性能用于工程設計，則應在較大範圍的內應力、時間和環境條件下對塑料材料進行試驗。
500N～50kN塑料拉伸蠕變試驗機；10kN～100kN高溫蠕變持久試驗機；200kN/300kN蠕變持久強度試驗機；半硬質塑料拉伸蠕變試驗機；非增強塑料拉伸蠕變試驗機；HRJ Tester；填充塑料拉伸蠕變試驗機；高溫拉伸蠕變試驗機；玻璃纖維增強塑料板材彎曲蠕變性能試驗；蜂窩夾層塑料彎曲蠕變試驗機；塑料力學性能可比多點數據的獲得和表示；電子持久強度試驗機；機電伺服蠕變試驗機；合成纖維拉伸蠕變試驗機；玻璃纖維拉伸蠕變試驗機；塗層織物拉伸蠕變試驗機；片狀板狀緩沖材料蠕變特性試驗；塊狀緩沖材料蠕變特性試驗；荷載持續時間效應和蠕變性能檢驗評價；jnshiyanji.com；塑料三點彎曲蠕變試驗；聚乙烯環境應力開裂（ESC）測定；高溫蠕變試驗機；19.060機械試驗；N72非金屬材料試驗機；Q23纖維增強複合材料；83.120增強塑料；
GB/T32682-2016塑料全缺口蠕變試驗（FNCT）；JC/T2312-2015非金屬密封材料用蠕變松弛率試驗機；GB/T 20671.5-2006墊片材料蠕變松馳率試驗方法；HRJ Tester；JC/T 778-2010玻璃纖維增強塑料板材和蜂窩夾層結構彎曲蠕變試驗方法；GB/T11546.1-2008塑料拉伸蠕變；GB/T1040.1-2006 塑料拉伸性能的測定；GB/T1040.2-2006模塑和擠塑塑料的試驗條件；GB/T2918-2018 塑料試樣狀態調節和試驗的標准環境；GB/T16825.2-2018拉力蠕變試驗機施加力的檢驗；jnshiyanji.com；JB/T9373-2014拉力蠕變試驗機技術條件；JB/T12276-2015電子蠕變松弛持久試驗機；
GB/T1034-2008；GB/T19467.1；GB/T15048；GB/T20672；GB/T19242；GB/T14745-2017；GB/T32983-2016；GB/T37564-2019；GB/T30710-2014；GB/T31291-2014；LY/T1975-2011；GB/T2039-2012；JJG 276；YS/T1266-2018；FZ/T60037-2013；ISO 899-1；HRJ Tester；ISO 16770；ISO 62；ISO 527-1；ISO 527-2；ISO 472；ISO 291；ISO 8013；ISO 10350-1；ISO 11403-1；ISO 204：ISO 7500-2；ISO 7850-86；ASTM E1012-2014；ASTM E139；
Plastic Tensile Creep Tester；Test method of creep performance for dipped cords；Creep relaxation test machine for nonmetallic sealing material；Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core；Plastics Determination of environment stress cracking (ESC) ；Polyethylene-Full-notch creep test (FNCT)；Plastics-Standard atmospheres for conditioning and testing；jnshiyanji.com；Plastic-Determination of creep behaviour Tensile creep；Metallic materials Uniaxial creep testing method in tension；Verification Regulation of High-Temperature Creep and Stress-Rupture Testing Machines；Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application；Verification of Static Uniaxial Testing Machines；Tension Creep Testing Machines；HRJ Tester；Verification of the Applied Force；Electronic Creep Tester；Electronic Relaxation Stress Tester；Rupture Strength Testing Machine；Coated fabrics for membrane structures-Test method for tensile creep；Cellular plastics rigid-Determination of compressive creep；Rubber vulcanized-Determination of creep in compression or shear；Standard Test Methods for Conducting Creep； Creep-Rupture and Stress-Rupture Tests of Metallic Materials；Test method of creep properties for package cushioning material；jnshiyanji.com；Standard for evaluation of duration of load and creep effects of wood and wood-based products；Creep Rupture Strength Tester；High-temperature Creep Tester；Creep elongation time；Plastic elongation time；Creep rupture time； Percentage creep elongation；Percentage initial plastic elongation；Percentage elongation after creep rupture；Creep curve；Initial stress；Rate of creep；Various Testing Machine；Laboratory Equipment；China Material Tester；World Material Tester；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Design and Manufacture Center；Special Test Accessories；
濟南恒瑞金試驗機有限公司；蠕變持久試驗機制造商；山東省力值硬度計量委員
（試驗機服務中心）（試驗機配件供應中心）（特殊夾具定制中心）
|
