试验机/电子万能试验机/井盖压力试验机/试验机配件/济南试验机服务中心
 
 
  | Homepage | About Us | Products | Certificates | Technical Support | Contact Us | 中文 |
Username:
Password:

@ WE Series Hydraulic Universal Testing machine
@ WEW Series Computer Hydraulic Universal Testing Machine
@ WAW Series Electrohydraulic Servo Universal Tester
@ WDW Series Electronic Universal Testing Machine
@ LDS Series Digital Electronic Tensile Testing Machine
@ MWD Series Hard Board Tester
@ Thermal Insulating Material Testing Machine 
@ Compression Testing Machine

@Torsion Testing Machine

@GW Steel Bending Testing Machine

@ Impact Testing Machine 

Special Testing Machine 
@ TL Series Spring Tester
@ Spring Torsion Testing Machine 
Spring Fatigue Testing Machine 

 



 


hengruijin

New English Website

More Link

 
2024-12-12 5:35:28
 
Homepage >> Products >> WAW-600D Computer Controlled Electro-hydraulic Servo Universal Testing Machine

 

1.     Main functions & features:
1)     Using microcomputer controlled high precision electro-hydraulic servo valve to drive precise hydraulic cylinder and can realize constant speed control to test force, displacement, deformation, etc. and so that to make tensile, compression, bending tests. If equipped with accessories, it can comply with other test requirements for various materials;
2)     Adopting underneath type hydraulic cylinder, which is installed at the bottom of the main machine, running stably; upper and lower jaw base are open structure, easy to clamp specimen;
3)     Independent hydraulic servo loading system, using high precision broadband electro-hydraulic servo valve to ensure system high precision, high efficiency, low noise, quick response; using independent hydraulic clamping system to ensure system run stably and low noise, and no-slipping of specimen during test.
Microcomputer control and processing system:
l       Servo control system: complete test parameters setting, test procedure autocontrol, data acquisition, processing, analysis, storage and display (test data including: upper and lower yield points, tensile strength, break strength, elastic modulus, elongation, proof strength of non-proportional elongation, etc.). It can realize closed-loop control of test force, deformation, displacement and constant speed control to test force, strain, displacement, deformation;
l       Displaying test force, peak, deformation, piston displacement, test curve on screen, with intelligent system of full keyboard input and control mode, which can realize arbitrary setting and smooth shift between control modes;
l       Complete data acquisition and processing (with many test methods, standards). With functions of simulation and reproduction of test procedure, re-analysis of test data, amplication, comparison, traverse, zoom in or out of test curves;
l       Using modularization, open programming, human design, users can freely adjust test standards, test reports, test parameters to meet with their different requirements, easy to upgrade and manage rights;
l       Using database to manage test data;
l       With expansion and updating capacity.
4)     protection functions:
l       limit position protection for oil cylinder;
l       overcurrent protection for hydraulic system;
l       overload protection;
l       overcurrent, overvoltage protection;
l       safe protection at the time of specimen break;
l       automatica protection after test.
 
2.     Main technical parameters:

No.
Items
Parameter
1
Max. test force (KN)
600
2
Relative error of indicating value of test force
≤±1% of indicating value
3
Measuring range of test force
2%-100%FS
4
Control range of constant speed stress (N/mm2.S-1)
2-60
5
Error of stress rate
≤±5%
6
Control range of constant speed strain
0.00025/s-0.0025/s
7
Error of strain rate
≤±5%
8
Control range of constant speed displacement(mm/min)
0.5-50
9
Relative error of displacement speed
≤±5%
10
Loading rate
real-time display on computer screen
11
Max. moving speed of piston (mm/min)
About 70
12
Max. moving speed of cross head (mm/min)
About 200
13
Tensile space (mm)
700mm, can be heightened to 1000mm
14
Compression space (mm)
500
15
Ф13-Ф40
16
Clamping thickness range of flat specimen (mm)
0-30
17
Clamping width of specimen (mm)
70
18
Motor power (KW)
About 4.5
19
Dimension of upper and lower platen (mm)
Ф160
20
Clamping mode
Hydraulically clamping
21
Dimension of main machine (mm)
730*580*2050
22
Dimesnion of servo control cabinet (mm)
1100*700*940
23
Power supply
380V±50Hz



Jinan Heng rui jin Instrument&Equipment Co.,Ltd