试验机/电子万能试验机/井盖压力试验机/试验机配件/济南试验机服务中心
 
 
  | Homepage | About Us | Products | Certificates | Technical Support | Contact Us | 中文 |
Username:
Password:

@ WE Series Hydraulic Universal Testing machine
@ WEW Series Computer Hydraulic Universal Testing Machine
@ WAW Series Electrohydraulic Servo Universal Tester
@ WDW Series Electronic Universal Testing Machine
@ LDS Series Digital Electronic Tensile Testing Machine
@ MWD Series Hard Board Tester
@ Thermal Insulating Material Testing Machine 
@ Compression Testing Machine

@Torsion Testing Machine

@GW Steel Bending Testing Machine

@ Impact Testing Machine 

Special Testing Machine 
@ TL Series Spring Tester
@ Spring Torsion Testing Machine 
Spring Fatigue Testing Machine 

 



 


hengruijin

New English Website

More Link

 
2024-3-29 19:52:29
 
Homepage >> Products >> WDW Electronic Universal Testing Machine >> WDW-300 Microcomputer Controlled Electronic Universal Testing Machine

 

WDW-300
Microcomputer Controlled Electronic Universal Testing Machine
Ⅰ.Property introduction:
1.This series machine is developed and manufactured according to GB/T228-2008 Tensile Test Method for Metallic Materials at Room Temperature, It adopts electronic measurement and can automatically calculate such parameters as Fs, Fsu, Fsl, Fp0.2, Fb, Rp0.2, Rr, Rt0.5, Rel, ReH, Rm, E etc. It also  can automatically process test data and print test reports. It satisfies the standards: Metal Compression GB7314-87, Metal Bending GB/T232-1999 and Metal Shearing testing standard. The test data is managed by Access database, which can be output to Excel form.
2.The upper beam and the lower workbench are connected by four columns to form the portal frame structure. The AC servo motor imported from Japan and server are installed under the workbench and through imported precise low noise speed reducer and synchronous gear belt mechanism, it can drive the precision double ball leading screw to rotate around the workbench and the upper beam. By rotating to drive the middle beam which is equipped with tensile and compression accessories to move up and down to load to the sample stably. It can realize a large range (0.05-250mm/min) adjustment to test speed and can make tensile, compression, bending, shearing, peeling and tearing tests for metallic and nonmetallic spare parts. The test process is stable, low noise and efficient. Its shell is sprayed with gray plastics, with nice appearance.
3.Adopting full digital three closed-loop control technology to realize the constant speed control to displacement, test force and strain. It has function of test force point setting freely and maintenance.
4.It adopts microcomputer control to complete test parameters setting, test process control, data collection, processing, analysis and display with control and measurement precise, accurate, quick, convenient and intelligent. Connected externally with microcomputer and equipped with Windows2000/XP special software for electronic universal testing machine, it can make statistical processing to test data and print various test curves and reports according national standard and as users’ requirements.
5.The moving speed of the beam can be adjusted when clamping the sample, flexibly to operate, switching freely.
6.After the test, it can automatically return to original position, intelligent, high efficient, quick.
7.It has strong functions of limit position protection to any working position, overload and overcurrent protection, reliable, safe.
8.It has strong self-built test database and the data can be saved, inquired and recalled any time.
9.It can realize constant speed control to test force, stress, deformation, strain, stroke, load, extension, displacement and low cycle control.
10.  It can switch among various testing curves, such as stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement –time curve, load-strain curve. It has functions of partial enlargement, superposition and comparison of test curves.
 
Standards of design and manufacture
1)GB/T2611-2007 General Technology Requirements of Testing Machine
2)GB/T228-2008 Tensile Test Method for Metal Materials at Roon Temperature
3)GB/T16491-2008 Electronic Universal Testing Machine
4)JJF1103-2003 Computer Data Acquisition System Verification for Universal Testing Machine
5)GB/T16825-1997 Verification for Tensile Testing Machine
6) GB/T7314-2005 Compression Test Method for Metal Materials at Room Temperature
7)GB/T14452-1993 Test Method of Bending Mechanical Property for Metal Materials
8)GB/T8653-1988 Test Method of Young Modulus, Chord Modulus, Tangent Modulus and Poisson’s Ratio
9)JJG139-1999 Verification Regulation of Tensile, Compression and Universal Testing Machine
 
Ⅱ. Main technical parameters:
1.Max. test force: 300kN
2.class of accuracy: class 1
3.measuring range of test force: 1%-100%FS
4.relative error of indicating value: within ±1% of the indicating value
5.resolution of test force: 1/±300000 of the max. test force (with resolution unchanged in the whole stroke)
6.measuring range of deformation: 0.2%-100%FS
7.relative error of deformation: within ±0.5% of the indicating value
8.resolution of deformation: 1/±300000 of the max. deformation (with resolution unchanged in the whole stroke)
9.relative error of displacement: within ±0.5% of the indicating value
10.resolution of displacement:0.01mm
11.adjustable range of load control speed: 0.01-5%FS/S
12.relative error of load control speed: within ±1% of the setting value
13.adjustable range of deformation speed: 0.02—5%FS/S
14.relative error of deformation speed: When the speed is less than 0.05%FS, the error is within ±2% of the setting value. When the speed is more than 0.05%FS, the error is within ±0.5% of the setting value.
15.Adjustable range of the beam’s speed:0.001-250mm/min
16.Relative error of beam speed: when the speed is less than 0.01mm/min.the error is within ±1.0% of the setting value, when the speed is more than 0.01mm/min, the error is within ±0.2% of the setting value.
17.Control range of constant test force, constant deformation, constant displacement: 0.5%-100%FS
18.Control accuracy of constant test force, constant deformation, constant displacement: when the setting value is less than 10%FS, the accuracy is within ±1% of the setting value, when the setting value is more than 10%FS, the accuracy is within ± 0.1% of the setting value.
19.Effective tensile space:550mm
20.Effective testing width:580mm
21.Dimension of main machine(L*W*H): 1050*750*2600
22.Weight: about 2900kg
23.Power: 380V ±50Hz, 4kW
 


Jinan Heng rui jin Instrument&Equipment Co.,Ltd